Set of equipment

1. WS1.5CE meter control valve assy (V15CEDTH)

• WS1.5CE control valve
• Meter assembly
• Topstack distributor, 50 mm riser
• Power supply
• Injector
• DLFC
• Funnel
• Valve instruction manual, Instruction manual

2. Pressure tank assembly

• Pressure tank CN-21x62 (top bottom opening 4˝-8-UN)
• Riser DN 50 mm
• Lateral bottom stack distributor

3. Brine tank assembly

• Brine tank 24x50, 378 L
• Brine well assembly (brine valve, overflow set)
• Brine grid

4. Resin

• Volume resin: 250 liters
• Type resin: PC003UN monodisperce cation exchange resin

CE CONTROL VALVE KEY FEATURES

• Regeneration control by water volume: delayed regen, immediate, both
• Possibility to change the cycle of regeneration stages and their time range
• Multilanguage menu: English, German, French, Ukrainian
• Different setting modes are available:

1. double valve twin or duplex configurations
2. multi-system mode, up to 8 system to the system controller
3. 2 external devices can be connected simultaneously

SPECIFICATIONS

• Maximum service flow rate*: 13.4 m³/h
• Quantity of resin: 250 L
• Volume capacity**: 50 m³
• Usage of salt per regeneration: 25.0 - 40.0 kg
• Usage of water per regeneration: 1.75 - 2.5 m³
• Duration of regeneration: 80 - 120 minutes
• Operating pressure: 2 - 6 bar
• Inlet, outlet: 1.5″
• Drain: 1″
• Brine line: ½˝
• Volume of pressure tank: 257 L
• Dome volume: 25 L
• Volume of brine tank: 378 L
• Dry system weight: 55 kg
• Electrical requirements: 230 V, 50 Hz
• Electrical power: 30 W
• Operating temperature: +4...+30 °C

*  At a hardness of 250 ppm CaCO₃, the salt dose for regeneration is 100 g/L

** With a linear filtration rate of 60 m/h

ACCESSORIES*

• V3009 WS1 Auxiliary Microswitch Assembly
• V3097BSPT Bypass shut-off valve during regeneration (no-Bypass valve) for 1.5” systems
• V3071BSPT Water Specialist 1.5˝ Motorized Alternating valve

*  Not included in the basic set. Can installed as additional equipment