Set of equipment

1. CE 1" valve assembly (V1CEDM):

• CE 1" control valve
• Top stack distributor, 11 segments
• Connection kit 1''
• Power supply
• Injector, DLFC
• Funnel
• Valve instruction manual, Instruction manual

2. Pressure tank assembly:

• Pressure tank 13x54, mounting base - 2.5"
• Riser
• Bottom stack distributor

3. Brine tank assembly:

• Brine tank 15x17x36, 125 L
• Brine well assembly (brine valve, overflow set)

4. PC002 filter material:

• Volume resin: 75 L

CE CONTROL VALVE KEY FEATURES

• ‍Regeneration control by water volume: delayed regen., immediate, both
• Possibility to change the cycle of regeneration stages and their time range
• Multilanguage menu: English, German, French, Ukrainian, Italian*, Polish*
• Different setting modes are available:
  • Twin or duplex configurations
  • Up to 8 systems in the system controller
  • 2 external devices can simultaneously be connected

SPECIFICATIONS

• Operating flow rate: 3.5 m³/h
• Maximum flow rate: 4.3 m³/h
• Volume capacity**: 15.0 m³
• Usage of salt per regeneration: 7.5 - 12.0 kg
• Inlet, outlet: G 1″
• Drain: G 3/4″
• Brine line: G 3/8″
• Operating pressure: 2 - 6 bar
• Operating temperature: +4...+30 °C
• Electrical requirements: 230 V, 50 Hz
• Electrical power: 30 W
• Volume of pressure tank: 105 L
• Volume of brine tank: 125 L
• System weight: 100 kg

RAW WATER QUALITY REQUIREMENTS

• Hardness: ≤750 mg/L CaCO₃
• Iron: ≤0.2 mg/L
• Manganese: ≤0.05 mg/L
• Chemical Oxygen Demand: 5 mg/L O₂
• Ammonium: 0.5 mg/L

ACCESSORIES***

• V3006: WS1 Bypass Assembly
• V3009: WS1 Auxiliary Microswitch Assembly
• V3070FM: Bypass shut-off valve during regeneration (no-Bypass valve) for 1" and 1.25" systems
• V3069MM-01: Water Specialist 1” & 1.25” Motorized Alternating Valve
• V3191-01: WS1 Bypass Vertical Adapter Assy

* Will available from Q3 2025
** At a hardness of 250 ppm CaCO₃, the salt dose for regeneration is 100 g/L
*** Not included in the basic set. Can be installed as additional equipment.