Clean-in-place procedure restores flux and rate of water purification of used reverse osmosis membranes. During operation, RO membranes are clogged with mineral (scaling), organic (fouling) and microbial (biofilm) deposits.
Parameters
- Power supply - 380 V, 50 Hz
- Power consumption - 2,2 kW
- Pump parameters (capacity @ pressure):
10 m³/hour @ 4,0 bar
- Dimensions (Width × Depth × Height) - 0,9 × 1,3 × 1,9 m
Package
- Polymeric tank for cleaning solution - 100 L
- Grundfos pump CM 3-4, 2,2 kW, 380 V
- Sediment filter BB20 with polypropilene cartridge
- Electrical panel
- Manometer (1 pc), thermomanometer (1 pc)
- PVC piping and valves
- Stainless steel frame with powder coating
Operation
Before CIP, the reverse osmosis system must be stopped, and the CIP unit’s feed and return ports must be connected to the membrane vessel’s feed, brine, and permeate ports. Cleaning solution tank is filled with purified water and the required quantity of cleaning chemical. The resulting solution is mixed, then circulated through the membrane vessel, while controlling pH, temperature, and color of the solution carefully.
Most cleaning protocols require first applying caustic cleaner, then acid cleaner.
The unit is also used to fill the membrane vessel with preservative solution when the RO system is shut down for an extended downtime.
