EN
DE
SV
NL
FR
ES
RO
PL
IT
All media (5)
All media (5)
Ecosoft E-360 ultraviolet water sterilizer features a metal case with an ultraviolet lamp enclosed in a special quartz sleeve.
It is designed for the disinfection of drinking water and household appliances in homes, hotels, cafes, restaurants, water bottling points, and devices. It can be used as an integral stage in drinking water treatment plants and in various industrial processes.
High dose of UV irradiation (30 mJ/cm²) sufficient to neutralize a wide spectrum of microorganisms
Physical method of disinfection that does not require chemicals or generate any toxic byproducts
Housing made of stainless steel by AISI 304
The sleeve is made of high-purity quartz and is extra-resistant to formation of deposits or erosion
Long efficient service life – up to 9 000 hours
Show More Features
Max flow rate
1.36
m³/h
Type and number of emitters
1 х T521
Max inlet pressure
8
bar
Electrical power of one emitter
21
W
Dimensions (L x W x H)
555 × 64 × 107
mm
Weight
2.9
kg
Operation
Water passes through the ultraviolet disinfectant, where the disinfection process takes place. The quartz cover is necessary to prevent water from entering the emitter case.
UV disinfection unit maintenance
- Replace the lamp once a year.
- Clean components to remove mechanical impurities and plaque.
Technical data
- Maximum flow of disinfected water: 1.36 m³/h
- Type and number of emitters: 1 х T521
- Maximum inlet pressure: 8 bar
- Power supply: 230 V, 50 Hz
- Power consumption of one emitter: 21 W
- Diameter of piping: 1" thread
- Lamp failure control device: visual
- Overall dimensions of assembled unit (L x W x H): 555 × 64 × 107 mm
- Approximate weight: 2.9 kg
Feed water requirements
- Temperature of the treated water: +4...+30 °С
- Turbidity: ≤ 0.58 mg/L
- Total hardness: ≤ 125 ppm
- Iron: ≤ 0.3 ppm
- Manganese: ≤ 0.05 ppm
- Hydrogen sulfide: ≤ 0.05 ppm
Set of UV disinfection system
- Stainless steel housing assembly
- Quartz sleeve
- UV emitter
- Power supply (electronic ballast)
E360
