Product information
The product fits an already operating reverse osmosis system, with the use of only a few basic tools*.
Reverse Osmosis Systems
Related digital tools
Technical information
Parameter
Specification
For systems
MO2, MO3, MO4
Connection port size
DN40
Recommended flow rate
8 м3 /год
The product is used in the following cases
- Insufficient supply water flow capacity for normalmembrane flush
- Longer membrane service life before CIP is required,especially on difficult feed water analysis
- Supply water treatment process can be sized to a smallerflow capacity absent the peak flow demand duringmembrane flush
*Ecosoft industrial reverse osmosis systems have built-inflush ports for the flushing assembly connection
Components
- Motorized valve
- PVC piping assembly with PVC check valve
- Pipe clamp and fasteners
- Installation and connection instructions
WARNING! To flush the membranes with permeate, it is necessary to use a purified water pump with sufficient capacity (according to the technical characteristics of the reverse osmosis system).The pump must be connected to the flushing unit with a permeate pipe of at least the nominal diameter of the flushing unit.
The flushing assembly has a large flow capacity for efficient flushing of the membranes
Duration and frequency of membrane flushes are set up in the controller settings
Local support
Contact
Need support from a local Expert?
Our partners are happy to support you with their expertise, ensuring a Professional installation and Easy Maintenance.
Just leave a short note and we will connect you with one of our local partners!
