Video
Image Size
CROSS 90 direct flow reverse osmosis filter
CROSS 90 direct flow reverse osmosis filter
DIMENSIONS, H×W×D:
435 x 140 x 458
mm
Filter weight
11
kg

CROSS 90 is a stylish and smart water filter that efficiently purifies up to 90 liters of water per hour, delivering it directly from your tap. With intelligent colored light alerts that monitor both filter status and water quality, you can always trust the purity of your water. Its sleek design adds a touch of sophistication to your kitchen. Reduces PFAS content by up to 99%.

Direct flow RO – 1.5 liters per minute
Smart indication for filter lifetime and water quality reminder
Recovery rate >50% – efficient water saving
Smart flushing – built-in automatic flushing program
DIY filter replacement – no need to cut off the water source during replacement
Slim design – saves more space under the sink
Show More Features

Flow capacity
90
L/h
Recovery
55-65
%
TDS (purified water)
5-15
ppm
Inlet water pressure
2-5
bar
TDS (inlet water)
1500
ppm
Electrical requirement
230
V, 50 Hz

Product
Box
Palette
Image Size
CROSS 90 direct flow reverse osmosis filter
CROSS 90 direct flow reverse osmosis filter
DIMENSIONS, H×W×D:
435 x 140 x 458
mm
Filter weight
11
kg
Image Box
CROSS 90 direct flow reverse osmosis filter
CROSS 90 direct flow reverse osmosis filter
Dimensions, H×W×D:
615 × 248 × 530
mm
Filter weight
kg
Image Palette
CROSS 90 direct flow reverse osmosis filter
CROSS 90 direct flow reverse osmosis filter
Pieces on pallet
18
pcs
Weight on pallet
kg

System components

  • Filter housing
  • Set of replacement filters
  • Smart faucet for purified water
  • 3-way connector
  • Drain saddle
  • Pack of tubes
  • Detachable power supply
  • User manual

High performance filtration

  • Composite polypropylene sediment and carbon block filter – removes sediment and rust particles, reduces content of chlorine, chlorination byproducts, natural organic matter, and petrochemicals. Replacement: once every 6 months.
  • 600 GPD RO membrane element – purifies water from 99.8% of impurities including bacteria, viruses, and unpleasant tastes or odors. Replacement: once every 24 months.
  • Chlorine taste and odor (CTO) filter – improves the taste and odor of purified water. Replacement: once every 12 months.

Smart indication

INDICATION OF REPLACEMENT FILTERS CONDITION

  • A color indication on the purified water faucet and the front panel of the filter reminds of the need to change the replacement filters.
  • Additional sound indication (1 short signal - the capacity is running out, 2 short signals - replacement is required).

INDICATION OF PURIFIED WATER QUALITY

  • The color indication on the front panel of the filter warns about the deterioration of water quality and the need to change the replacement filters.

Smart functions

  • Membrane auto flushing: The filter activates flushing of the membrane element at each connection to the network, 5 minutes after each water intake, and after each 12-hour standby.

    Increased membrane service life and purifying efficiency

  • Leakage protection: The filter automatically shuts off the inlet water if any leaks are detected inside the filter.
  • Not-closed faucet indication: The filter notifies you with a sound signal after 30 minutes if you forget to close the faucet. It automatically shuts off the inlet water 3 minutes after the buzzer sounds to prevent flooding.

Technical characteristics

  • Inlet pressure: 2-5 bar
  • Inlet water temperature: +5...+30°C
  • Capacity: 1.5 L/min
  • Power supply: 230 V, 50 Hz
  • System weight: 11 kg
  • Permissible ambient temperature: +5...+40°C
  • External connection to water supply: ½″ inch
  • Overall dimensions (H x W x D): 435 x 140 x 458 mm
  • Power consumption: 120 W

Source water requirements

  • pH: 6.5–8.5
  • Total dissolved solids: ≤ 1500 ppm
  • Hardness: <500 ppm CaCO₃
  • Chlorine: ≤ 0.5 ppm
  • Total iron: ≤ 0.3 ppm
  • Manganese: ≤ 0.1 ppm
  • Chemical oxygen demand: ≤ 5 ppm O₂
  • Total microbial count (TMC): ≤ 50 CFU/100 ml
  • Coliform index: ≤ 3

High-performance filtration

CROSS 90 uses three replaceable cartridges: composite PP sediment and carbon block filter that removes sediment, chlorine, and organics

Membrane auto flushing

The smart functions feature automatically flushes the membrane element, enhancing its lifespan and purification efficiency. Flushing occurs each time the filter connects to the network, 5 minutes after every water intake, and after every 12-hour standby period. This ensures consistent performance and prolonged membrane life.

Leakage protection

Leakage protection feature automatically shuts off the inlet water if a leak is detected inside the filter, preventing potential damage.

Smart indication

The system alerts you when it’s time to replace filters, with color signals on the faucet and front panel. A beep warns when filter capacity is low or replacement is needed. It also monitors water quality, notifying you if it deteriorates.

Compact dimensions

The slim and compact design of this product saves valuable space under your sink, fitting neatly in tight areas. Ideal for kitchens with limited cabinet space, it helps keep your kitchen clean and organized.

Real-time monitoring for reliable water quality

The filtration system ensures consistently pure water and features real-time monitoring through a smart faucet indicator. This allows you to easily check filter status, providing reassurance of safe and clean water with every use.

EUR
Price on request
Out of stock
CROSS90 direct flow reverse osmosis filter at the best price ⏩ Quality is approved by ISO and CE certificates ⭐️ 12 months warranty of CROSS90 direct flow reverse osmosis filter ✔️ Timely delivery of our products to any country of the world ⚡️ More than 60 countries.
Domestic Reverse Osmosis
CROSS 90 direct flow reverse osmosis filter
MO3600PECO
Ecosoft