• About us
  • For partners
  • For consumers
  • Products

Ecosoft Scalex inline scale inhibitor for water heaters

Article : FOSE200ECO
  • Extends the life of the boiler and heating devices  ?
  • Reduces power consumption  ?
  • Eco-friendly technology  ?
  • 1 replacement filter per 6 months   ?
VAT NOT included

Formation of scale reduces efficiency of boiler or heater operation, eventually resulting in breakdown of the equipment with no possibility for recovery.

The Scalex filter:

  • protects the equipment from scale;

  • up to 30% of energy consumption with 100% power efficiency of heating element ;

  • stable operation and long service life of boiler;

Advantages of the filter:

  • capacity of 20 000 L (5 300 gal) or 6 months of operation;

  • high operational temperature of heated water - up to 105 °С;

  • FREE OF PHOSPHATES & POLYPHOSPHATES - harmless for human health and environment;

  • protection from sediments.

With the Scalex filter, you will cut the expenses connected with:

  • boiler or heater maintenance;

  • power consumption.

  • Boiler and heater will serve much longer.

The Scalex filter media releases specific volume of substance sufficient for scale prevention.

It's important to know, that the filter does not soften water, but has specific effect on hardness salts, protecting heating elements of boilers and heaters from scale.

Filter has complex mechanism of  scum removing

  • it stops the growth of scale crystals – special component of the media does not let crystals form into crystal lattice and deposit on the surface of heating elements;
  • destroys crystals by breaking them into smaller parts;
  • impedes crystals from connecting by covering them and thus preventing from sticking to each other.

Nylon mesh reduces the content of sediments larger than 100 micron including sand, silt, and rust.

In contrast to polyphosphate filters, this filter does not contain phosphates or polyphosphates, so it is harmless both to human’s health and environment.

The Scalex scale inhibitor is intended for cold tap water only.

Its capacity is 20 000 L or 6 months of service.

Please be advised that our tap water contains many various contaminants. The filter media is gradually being contaminated by sediments, iron and organic matter, so it stops releasing active components into the water. In other words, there still is active substance in its grains, but it is not being released into the water.   

Hence, to keep your boiler or heater protected at all times, you are recommended to replace the filter every 6 months.

Technical characteristics



Filter capacity

up to 20 000* L

Filter media volume

100 ml


130 mm


65 mm

Connection size


Temperature of water flowing through the filter 

4...30 °C

Operating temperature of heated water

up to 105 °C

Operating pressure

up to 6 atm

*depends on quality of purified water


This Platform uses first- and third-party cookies to improve your experience and our services, analyzing browsing within the Platform. By continuing to browse you are accepting their use.

You can find more information or learn how to change the settings in our Cookie Policy.

By continuing to browse you are accepting their use.

Also you confirm that you have read and understood the Privacy Policy.