-
About us
-
For partners
-
For consumers
-
Products
Key advantages
Reduction of iron up to 80%
Full capacity up to 10 000 L
Stable operation and efficiency throughout the service life
Filter housing made of pure European food grade plastic
Applicable for filters produced by other manufacturers
Basic information
The replacement filter contains the blend of catalytic sorption material, high-quality activated carbon and pH corrector.
The filter reduces content of iron and its by-products in borehole water, as well as decreases concentration of oil products and pesticides. Improves color, taste, and odor of water.
Can replace filters of the standard size of 4.5"×20" produced by other manufacturers.
Consumers
Users of borehole water with iron content up to 1 mg/L.
Benefits of using the filter
Reduction of iron
Transparent water with no red or brown shades
No brown deposit in the kettle
Metallic taste will disappear from the water
No unpleasant odors or flavors
During the filtration water flows through the media which reduces content of iron and its by-products in borehole water, as well as decreases concentration of oil products and pesticides, improves color, taste, and odor of water.
Technical and operational characteristics
|
Height, mm |
508±2.0 |
|
Maximum outer diameter, mm |
114±1.0 |
|
Maximum capacity, L |
10 000 |
|
Operational temperature of water, °C |
+3…+43 |
|
Recommended filtration flow rate, L/min |
5.0 |
|
Service life, not more than, months |
6 |
The replacement filter is intended for cold water only.
The filter capacity depends on the quality of feed water.
Do not exceed the recommended filtration rate, this can lead to deterioration of water purification quality.
Before use, plunge a new replacement filter into cold water, and keep it submerged at least during 8 hours.
After the filter replacement, discharge at least 10 liters of filtered water into the sewer.
The filter is recommended to be replaced every 3 months, regardless of the volume of consumed water.
