-
About us
-
For partners
-
For consumers
-
Products
Key advantages
Affordable price for guaranteed quality
Full capacity up to 500 L
Hardness reduction
Filter housing made of pure European food grade plastic
Applicable for filters produced by other manufacturers
Basic information
The replacement filter contains food grade ion-exchange resin.
The filter reduces hardness which leads to formation of deposits on sanitary ware and scale on the surface of heating elements.
Can replace filters of the standard size of 2.5"×10" produced by other manufacturers.
Consumers
Apartment or house inhabited by 2 to 5 people using in-line filter.
Benefits of using the filter
No scale while boiling water
Natural taste and aroma of tea and coffee
Home appliances (kettle, iron, steam cooker, air humidifier etc.) will stay protected from scale and malfunction related to scale
During the filtration water flows through the media which exchanges the hardness cations of calcium and magnesium for sodium ions absolutely harmless for human health and sanitary ware.
Technical and operational characteristics
|
Full height, mm |
252±1.0 |
|
Fixation height, mm |
250±1.0 |
|
Maximum outer diameter, mm |
72±0.5 |
|
Maximum capacity, L |
500 |
|
Operational temperature of water, °C |
+3…+43 |
|
Recommended filtration flow rate, L/min |
1.0 |
|
Service life, not more than, months |
6 |
The replacement filter is intended for cold tap water only.
The filter capacity depends on the quality of feed water.
Do not exceed the recommended filtration rate, this can lead to deterioration of water purification quality.
After the filter replacement, discharge at least 10 liters of filtered water into the drain.
The filter is recommended to be replaced every 3 months, regardless of the volume of consumed water.
