The Ecosoft 2,5"х10" polypropylene melt blown replacement filter with bacteriostatic effect is intended for pre-treatment of water from sediment particles such as rust, sand, scale, silt etc., contaminants of which lead to development of slime.
The special bacteriostatic mineral food grade supplement decreases development of slime in 2 times.
Due to uniform melting-in of the supplemented growth of bacteria is reduced on the whole surface of the filter.
Capacity enhanced up to 30%
Risk reduction of secondary microbiologic contamination of water by the filter
High quality of purification
Stable characteristics for retention of the particles
European high melt flow PP
1-bathroom apartment or house inhabited by up to 3 residents.
Benefits of using the replacement filter
Shower and bath with pure and transparent water
Shower and Jacuzzi sprayers will remain clean, water pressure will be high
Your home appliances and heating systems will work longer
Replacement filters for drinking water will have to be replaced much less often
The replacement filter represents a polypropylene porous cylinder produced using the melt-blown technique.
Necessary degree of rigidity is achieved without application of core by melting fibers into the rigid structure.
The replacement filter reduces contents of sediments, and clean water is supplied to the consumer.
The replacement filter is intended for cold water only.
The replacement filter is not intended for purification of microbiologically contaminated water without proper decontamination of feed or purified water.
The service life of the replacement filter depends on the quality of feed water.
Do not exceed the recommended filtration rate, this can lead to deterioration of water purification quality.
The replacement filter must be replaced at least every 6 months.
Technical characteristics of 5-micron Ecosoft PP melt blown sediment replacement filter with bacteriostatic effect 2,5"х10"