We have been producing water purifying filters for 28 years and selling them in more than 50 countries

  • Products
    0
  • About us
  • For partners
  • For consumers

We have been producing water purifying filters for 28 years and selling them in more than 50 countries

Ecosoft PP melt blown sediment replacement filter for hot water 2.5"×10" 5-micron

Article : CPV25105HWECO
  • Transparent water, protection of home appliances, plumbing, piping and main filter   ?
  • Stable operation   ?
  • Purifies the hot water  ?
  • Replacement every 3-6 months  ?
€2
VAT NOT included
1.6

Basic information

The Ecosoft 2,5"х10" polypropylene melt blown replacement filter for hot water is intended for pre-treatment of hot water from sediment particles such as rust, sand, scale, silt etc.

Provides plumbing and piping protection from damages.

Key advantages

  • 10 000 liters capacity

  • High quality of purification 

  • Stable characteristics for retention of the particles

  • European high melt flow PP    

Consumers

1-bathroom apartment or house inhabited by up to 3 residents.

Benefits of using the replacement filter

  • Shower and bath with pure and transparent water

  • Shower and Jacuzzi sprayers will remain clean, water pressure will be high

  • Your home appliances and heating systems will work longer 

The replacement filter represents a polypropylene porous cylinder produced using the melt-blown technique.

Necessary degree of rigidity is achieved without application of core by melting fibers into the rigid structure.  

The replacement filter reduces contents of sediments, and pure water is supplied to the consumer.

The replacement filter is not intended for purification of microbiologically contaminated water without proper decontamination of feed or purified water.

The service life of the replacement filter depends on the quality of feed water.

Do not exceed the recommended filtration rate, this can lead to deterioration of water purification quality.

The replacement filter must be replaced at least every 6 months.


Technical characteristics of 5-micron Ecosoft PP melt blown sediment replacement filter for hot water 2,5"х10"   

Parameter

Value

Type of filter

sediment filters

Material

polypropylene fiber

Standard size

2.5"×10"

Filter rating, micron

5

Water temperature, °C 

+3...+75

Height, mm 

250 ± 1.0

External diameter, mm 

60 ± 1.0

Recommended filtration rate, l/min

8