• About us
  • For partners
  • For consumers
  • Products
Ecosoft

Ecosoft PP melt blown sediment replacement filter 2.5"×10" 5-micron

Article : CPV25105ECOEXP
  • Transparent water, protection of home appliances, plumbing, piping and the main filter  ?
  • Stable particle retention  ?
  • Replacement every 3-6 months  ?
€1.35
1.35

Basic information

The Ecosoft 2,5"x10" 5-micron melt blown PP replacement filter is intended to purify water from sediment particles such as rust, sand, scale, silt etc. 

Key advantages

  • 10 000 liters capacity

  • High quality of purification

  • Stable characteristics for retention of the particles

  • European high melt flow PP    

Consumers

1-bathroom apartment or house inhabited by family with up to 3 people.

Benefits of using the replacement filter

  • Shower and bath with pure and transparent water

  • Shower and Jacuzzi sprayers will remain clean, water pressure will be high

  • Your home appliances and heating systems will work longer  

  • Replacement filters for drinking water will have to be replaced more rarely

The replacement filter represents a polypropylene porous cylinder produced using the melt-blown technique.

Necessary degree of rigidity is achieved without application of core by melting fibers into the rigid structure.  

The replacement filter reduces contents of sediment particles, and clean water is supplied to the consumer.



The Ecosoft replacement sediment filter 2,5"x10" is intended for cold water only.

The replacement filter is not intended for purification of microbiologically contaminated water without proper decontamination of feed or purified water.

Service life of the replacement filter depends on the quality of feed water.

Do not exceed the recommended filtration rate, this can lead to deterioration of water purification quality.

The replacement filter must be replaced at least every 6 months.

Technical characteristics of Ecosoft 2,5"х10" PP melt blown replacement filter

Parameter

Value

Type of filter

sediment filters

Material

polypropylene fiber

Standard size

2.5"×10"

Filter rating, micron

5

Water temperature, °C  

+3...+43

Height, mm  

250 ± 1.0

External diameter, mm  

60 ± 1.0

Recommended filtration rate, l/min

10


x^