We have been producing water purifying filters for 28 years and selling them in more than 50 countries
The Ecosoft 2,5"x10" 20-micron melt blown PP replacement filter is intended to purify water from sediment particles such as rust, sand, scale, silt etc.
10 000 liters capacity
High quality of purification
Stable characteristics for retention of the particles
European high melt flow PP
1-bathroom apartment or house inhabited by family with up to 3 people.
Shower and bath with pure and transparent water
Shower and Jacuzzi sprayers will remain clean, water pressure will be high
Your home appliances and heating systems will work longer
Replacement filters for drinking water will have to be replaced more rarely
The replacement filter represents a polypropylene porous cylinder produced using the melt-blown technique.
Necessary degree of rigidity is achieved without application of core by melting fibers into the rigid structure.
The replacement filter reduces contents of sediment particles, and clean water is supplied to the consumer.
The Ecosoft replacement sediment filter 2,5"x10" is intended for cold water only.
The replacement filter is not intended for purification of microbiologically contaminated water without proper decontamination of feed or purified water.
Service life of the replacement filter depends on the quality of feed water.
Do not exceed the recommended filtration rate, this can lead to deterioration of water purification quality.
The replacement filter must be changed at least every 6 months.
Type of filter
Filter rating, micron
Water temperature, °
250 ± 1.0
External diameter, mm
60 ± 1.0
Recommended filtration rate, l/min