• About us
  • For partners
  • For consumers
  • Products
Ecosoft

Water softening filter Ecosoft FU 3672CE2 (Dowex® HCRS/S)

Article : FU3672CE2
  • 16 cubic meters of pure water per hour 
  • Appliances without scum and sediment  ?
  • Low operating costs  ?
  • 7 years life of the filter media  ?
  • Full automation  ?
  • Provides protection against power outages  ?
€11,400
VAT NOT included
11400

Filter Ecosoft FU 3672 CE2 is designed for industrial water softening. System capacity is up to 16 m³/h.

Designed for water softening for industrial and household needs. The system can be used for both commercial water treatment and small industrial processes.

What are the model features?

The water softening filter can save a lot of space, because one filter can replace several specialized and bulky facilities. The performance of one Ecosoft FU3672CE2 filter is 16 m³/h purified water per hour. The system works automatically, its maintenance is simplified to the timely addition of tableted salt to the tank.

Main advantages

  • Lack of a sediment and a white scurf on the water contacting surfaces.

  • Reliable and effective work up to 5 years*.

  • Energy savings and reduced wastewater amount.

  • Longer service life of electrical equipment (heating elements, boilers, steam turbine, etc.) due to effective reduction of water hardness.

  • Quality assurance confirmed by international certificates of CE and ISO.

imgkitchen.jpg

* Subject to proper operation.

Filter construction and operation

The system consists of only two modules filter vessel with ion exchange resin and a brine tank. The cylinder  is made of a polymer corrosion resistant composite material. The column is filled with ion exchange resin Dowex®, manufactured by Dow Chemical (USA).

Water softening is carried out in one stage. Pre-cleaned from mechanical impurities water enters the filter vessel filled with ion exchange resin. Water passes through a layer of resin, while hardness ions are trapped on the resin, and purified water is supplied to the consumer through the central pipe of the vessel.

Regeneration

Due to the regeneration ability of the ion exchange resin, its service life can be up to 5 years. The restoration of the operation properties of the material is carried out by washing with a solution of a tableted salt, which is prepared in a separate brine tank. As well as water purification, the process of regeneration of filter media is carried out automatically.

Control Automation

The filter is controlled by an electromechanical valve CE (Clack Corporation, USA).

Who are the users?

The filter of softening Ecosoft FU 3672CE2 fits for objects with a total capacity up to 16 m³ per hour. Installation can be used for purifying and softening both artesian wells, and tap water.

пищевая промышленность.png

The filter is connected to the cold water supply. Water pre-cleaned from sediment particles enters the filter vessel filled with ion-exchange resin. Water passes through the resin layer which reduces hardness of the water. Purified water is supplied to consumer through the riser pipe of the filter vessel.

After the resin is exhausted and can no longer absorb the hardness ions, the control valve switches the filter to regeneration mode. For user’s convenience, the valve settings are programmed so that the filter is regenerated at the time when water is not consumed. 

Regeneration

Regeneration of the filter media is divided into 4 clearly predetermined stages that are carried out by the valve independently. 

  • The first stage - the filter is backwashed in order to plough up the filter media and wash out sediment particles from it. 

  • Then the brine solution is supplied from the brine tank to the filter vessel to pass through resin. As a result, hardness salts are washed out, and together with the remains of solution are discharged to sewers. 

  • At the end of the regeneration, the resin is washed with a direct stream of water (step 3) to wash out remains of brine solution. 

  • The last stage (4) is filling the brine tank with water to dissolve the tablet salt and preparing the solution for the next regeneration. 

After that, the filter can be again used for water purification.

Thanks to the use of a multifunctional valve, the filter does not require constant attention. The only important task connected to maintenance for customer is timely stocking of the salt. It will ensure efficient regeneration of the filter media and thus durable filter service life and water quality.

If any problem arises, the valve will inform about the problem at the display.

Technical data


 Parameter
 Value

Capacity (nominal), m3/hour

16

Volume of filter media, L

700

Volume capacity, m3 (for hardness at 5 meq/L)

140

Salt consumption per one regeneration, kg

70...104

Water consumption per one regeneration (volume of discharge), m3

7

Regeneration duration, min

80...110

Pressure drop in service mode, bar

1.0…1.5

Operating pressure, bar

2...6

Power supply

230 V, 50 Hz

Power consumption, W

30

Diameter of pipeline connections

2"

Net weight, kg

670

System dimensions (width x depth x height), cm

170x94x260

Requirements for water supplied to the filter

Parameters

Value

Hardness, meq/l

15.0

Iron, mg/l  

0.2

Manganese, mg/l

0.05

Chemical oxygen demand, mg O2/L

5.0

Required level of purification from sediment particles, micron

100

Initial water temperature, °С

+4 … +30


Components of the filter

  • Filter vessel

  • Clack WS2 СЕ multifunctional control valve (USA)

  • Brine tank with brine system for regeneration

  • Dowex ion-exchange resin (Dow Chemical, USA)

Cookies

This Platform uses first- and third-party cookies to improve your experience and our services, analyzing browsing within the Platform. By continuing to browse you are accepting their use.

You can find more information or learn how to change the settings in our Cookie Policy.

By continuing to browse you are accepting their use.

Also you confirm that you have read and understood the Privacy Policy.