We have been producing water purifying filters for 29 years and selling them in more than 60 countries
We have been producing water purifying filters for 29 years and selling them in more than 60 countries
The Ecosoft FU 1354 CE filter is designed to reduce the hardness of household water. The system consists of two main components — a filter module (a cylinder with a control valve) and a brine tank.
Sediments on the heating elements of household appliances, white bloom on tiles and plumbing and stains on glass surfaces are the results of hard water being used.
In addition to the destructive impact on the state of household appliances, a high content of hardness ions has an impact on human health. This problem is inherent both for water from natural sources, and for the city water supply. The reasons for this may be hard source water or the imperfection of centralized water purifying, as well as the use of outdated technologies.
To reduce the hardness of household water, softening filters are used. Ion-exchange resin HCR-S/S (cation exchange resin manufactured by Dow, Dowex™) is used as the filter media. During the filtration process, an ion-exchange reaction takes place — the ions of hardness salts are replaced by safe sodium ions, which provide a normal level of water hardness.
Filter softener reduces energy consumption, increases the efficiency of household appliances and reduces the frequency of breakdowns, significantly reducing the cost of repairs.
The Ecosoft FU 1354 CE filter is designed for houses and apartments with 3-4 bathrooms. It is intended for softening of water for household purposes.
The system is designed for daily water purification for 5-6 people. After softening, water can undergo an after-treatment to a drinking state using a reverse osmosis system.
Linen and clothes keep their colour and quality after washing, and therefore last longer
Up to 50% savings in detergents and washing powder and up to 30% energy savings!
Your home appliances — iron, steamer, humidifier — will no longer suffer from the formation of scale or sediment
Bathing will not cause discomfort and dry skin.
layer which reduces water hardness. Purified water is supplied to the consumer through the riser pipe of the filter vessel.
After the resin is exhausted, and can no longer absorb hardness ions, the control valve switches the filter to regeneration mode. For the user’s convenience, the valve settings are programmed so that the filter is regenerated at a time when water is not consumed.
Regeneration of the filter media is divided into 4 clearly predetermined stages that are carried out by the valve independently.
After that, the system can be used for water purification again.
Thanks to the use of a multifunctional valve, the filter does not require constant attention. The only important task connected to maintenance for customer is timely stocking of the salt. It will ensure efficient regeneration of the filter media and thus durable filter service life and water quality.
If any problem arises, the valve will display a text message about the problem.
Parameter |
Value |
Capacity (nominal), m3/hour |
3.5 |
Volume of filter media, L |
75 |
Volume capacity, m3 (for hardness at 5 meq/L) |
15.0 |
Salt consumption per one regeneration, kg |
7.5...10.0 |
Water consumption per one regeneration (volume of discharge), m3 |
0.75 |
Regeneration duration, min |
80...110 |
Pressure drop in service mode, bar |
0.5...1.0 |
Operating pressure, bar |
2...6 |
Power supply |
230 V, 50 Hz |
Power consumption, W |
30 |
Diameter of pipeline connections |
1" |
Net weight, kg |
97 |
System dimensions (width x depth x height), cm |
80x45x160 |
Parameters |
Value |
Hardness, meq/l |
15.0 |
Iron, mg/l |
0.2 |
Manganese, mg/l |
0.05
|
Chemical oxygen demand, mg O2/L |
5.0
|
Required level of purification from sediment particles, micron |
100
|
Initial water temperature, °C |
+4 … +30
|
Filter vessel
Clack WS1 СЕ multifunctional control valve (USA)
Brine tank with brine system for regeneration
Dowex ion-exchange resin (Dow Chemical, USA)