The filter Ecosoft 108 Premium is designed to reduce the hardness of household water. The filter system consists of two main components - a module (a cylinder with a control valve) and a brine tank.
What is hard water?
Sediments on the heating elements of household appliances, white plaque on tiles and plumbing, stains on glass surfaces - all this hard water using.
In addition to the negative impact on the condition of household appliances, a high content of hardness ions has an impact on human health. This problem is inherent for both water from natural sources, and for water from the city water supply. The reasons for this can be hard source water, the imperfection of centralized water treatment technologies, as well as the use of outdated technologies.
Effective solution for the problem of hard water
To reduce the hardness of household water, softening filters are used, such as Ecosoft water softener 108 Premium. Ion-exchange resin HCR-S/S (cation exchange resin manufactured by Dow, Dowex™) is used as filter media. During the filtration process, an ion-exchange reaction takes place - the ions of hardness salts are replaced by safe sodium ions, leading to normal level of water hardness.
Filter softener reduces energy consumption, increases the efficiency of household appliances and reduces the frequency of breakdowns, significantly reducing the cost of repairs.
Economical consumption of salt tablets.
The filter is fully automatic, silent.
Attractive and compact design.
Reliable and efficient operation for at least 5 years*.
*Subject to proper operation and timely replacement of filter media.
Cabinet with filter media.
Control valve (installed at the top of the column).
Who are the users?
The Ecosoft 108 Premium filter is designed for small houses and apartments with up to 2 bathrooms. It is intended for softening of water of a household purposes.
The system is designed for daily water preparation for 1-3 people. After softening, water can undergo an after-treatment to a drinking quality using a reverse osmosis system.
Improvements are obvious!
Linen and clothes after washing will retain color and quality, and accordingly will last longer
Up to 50% savings in detergents and washing powder and up to 30% energy savings!
Your home appliances - iron, steamer, humidifier will no longer suffer from the formation of scale or sediment
Bathing will not cause discomfort and dry skin
The filter is connected to the cold water supply. Water pre-cleaned from sediment impurities enters the filter vessel filled with ion-exchange resin. Water passes through the resin layer which reduces water hardness. Purified water is supplied to consumer through the riser pipe of the filter vessel.
After the resin is exhausted, and can no longer absorb the ions of hardness, the control valve switches the filter to regeneration mode. For user’s convenience, the valve settings are programmed so that the filter is regenerated at the time when water is not consumed.
Regeneration of the filter media is divided into 4 clearly predetermined stages that are carried out by the valve independently.
Back flush with a reverse flow of water, which allows you to fluff the filter media and remove the mechanical impurities from it.
Then a brine solution is fed from the tank into the filter vessel; it passes through the resin, as a result of which the hardness salts are flushed out of it, and, together with the solution residues, are discharged into drainage.
At the end of the regeneration, the resin is rinsed with a direct stream of water (stage 3) to flush out the salt solution.
The last stage (4) is filling the brine tank with water to dissolve the salt tablets and prepare the solution for the next regeneration.
After that, the system can be again used for water purification.
Thanks to the use of a multifunctional valve, the filter does not require constant attention. The only important task connected to maintenance for customer is timely stocking of the salt. It will ensure efficient regeneration of the filter media and thus durable filter service life and water quality.
If any problem arises, the valve will inform about the problem at the display with a text message.
Capacity (nominal), m3/hour
Volume of cation resin, L
Volume capacity, m3 (for hardness at 5 mq/L)
Salt consumption per one regeneration, kg
Water consumption per one regeneration (volume of discharge), m3
Regeneration duration, min
Pressure drop in service mode, bar
Operating pressure, bar
230 V, 50 Hz
Power consumption, W
Diameter of piping
Net weight, kg
System dimensions (width x depth x height), cm
Requirements for feed water
Chemical oxygen demand, mg O2/L
Required level of purification from sediment particles, micron