The Ecosoft FP 2162CE125 sediment filter is iintended for water purification removing sediment impurities (silt, sand, rust, scale) in water, applicable for objects with the capacity below 2.65 m3/h.
The filter can be also employed as the first stage of water purification before water softeners, complex purification, chlorine and hydrogen sulfide reduction filters to ensure their proper and effective operation.
p style="text-align: justify;">
The system consists of a corrosion-resistant vessel filled with high-quality sorption media Filter-Ag®, and a control valve. In the upper part of the cylinder the valve is attached, with elements of the drainage-distribution system.
Water flows into the filter vessel, passes through a layer of filtering media that effectively inhibits mechanical impurities. The purified water comes to the consumer through the central pipe of the vessel.
The unit is connected to the cold water supply, sewage and electrical network.
High efficacy of 20-40 micron sediments reduction.
Fully automatic and noise-free.
Low consumption of water for regeneration due to lightweight of the media.
Quality guaranteed by the international CE and ISO certificates.
Benefits of using the filter
Lack of sediment silt and sand on the surface of the bath and in the sink.
Full automation of the filter.
Reliable and efficient work for at least 5 years*.
Longer service life of household appliances, plumbing and heating systems.
Quality assurance (confirmation by international certificates of CE and ISO).
The filter is connected to cold water supply. Water enters the filter vessel and goes through the layer of the filter media, which effectively reduces sediment. Purified water is delivered to the consumer through the riser pipe of the filter vessel.
When the filter is exhausted, it automatically switches to regeneration mode in order to regenerate the operational characteristics of the filter media.
At the prescribed time the control valve shifts the system into regeneration mode. For the consumer’s convenience, the system is regenerated during times when water is not being consumed. During the regeneration the filter is backwashed at high speed, the water stirs and cleans the surface of filter media, washing out all the impurities, and then is discharged into the drain. After this the system can be used for water purification again. Untreated feed water is used for the regeneration.
Thanks to the use of a multifunctional valve, the filter does not require constant attention. The only important task connected to maintenance for customer is timely stocking of the salt. It will ensure efficient regeneration of the filter media and thus durable filter service life and water quality.
If any problem arises, the valve will display a text message about the problem.
Capacity (nominal), m3/h
Volume of Filter-Ag Plus® filter media, L
Volume of quartz sand (base layer), kg
Water consumption for regeneration, m3/h
Duration of regeneration, min
Water volume for one regeneration, m3
Required level of pretreatment from sediments
Operating pressure, bar
Pressure drop in service mode, bar
Temperature of feed water, °C
Power supply and consumption of control valve
230 V, 50 Hz, up to 30 W
Connection (male thread)
Net weight, kg
Filter dimensions (HxD), cm
212 х 55
Components of the filter
Filter vessel with distributive node.
Clack WS125 CE multifunctional control valve (USA).
Clack Corporation Filter-Ag Plus® filter media (USA).