Iron and hardness reduction filter Ecosoft FK 1054CE (Ecomix® A)

Ecosoft FK 1054CE filter is an independent filter intended for reduction of iron, manganese, hardness, ammonium and organic matter in water.

The filter vessel is filled with the Ecomix^® advanced softening media and supplied with a multifunctional control valve and a brine tank for system regeneration.

The unique control valve is a product developed by Ecosoft and produced by Clack Corporation (USA). It provides the filter’s independent service, keeps a constant reserve of purified water and doesn’t require any special attention.

Key advantages

• Fully automatic and noise-free.
• Uninterrupted delivery of pure and soft water.
• Durable and efficient operation for no less than 5 years.
• Cost-effective salt consumption and low volume of discharge.
• Quality guaranteed by the international CE and ISO certificates.

Benefits of using filtered water

• Pure water with no odours in every tap, shining sanitary ware, and utensils.
• Silky skin and healthy hair.
• Condition and colours of clothes and linens are preserved.
• Significant savings on detergents – up to 50%.
• Longer service life of equipment with heating elements (washing machine, dishwasher, boiler, and kettle).

Device and filter operation

The system consists of two main modules - a vessel with filter media and a salt-solvent tank. The cylinder is made of a corrosion resistant polymer composite material. Inside, there is Ecomix^® filtering mixture, which consists of several components.

Each component of the filter filling is designed to neutralize or retain certain different kinds of harmful impurities. As a result, integrated water filtration is carried out in one stage. Purified water has good organoleptic characteristics and can be used for any household needs. It is completely safe for skin and hair, and also does not form scale on the heating elements of the devices.

Who are the users?

The filter is commonly used for water purification in 2-bathrooms houses, inhabited by 3 to 4 residents.

How does it look?

The improvements are clear!

The filter is connected to the cold water supply system, effectively purifies the water and independently controls all the processes of its work.
Pre-purified water with mechanical impurities removed enters the filter vessel filled with Ecomix^® filter media. The media consists of five components that successively trap iron, manganese, organic impurities and hardness salts. Purified water is supplied to the consumer through the central pipe.

When the filter media resources are exhausted, the filter independently goes into regeneration, but only at a time when water consumption is minimal, so it won't deprive you of access to purified water. In addition, the control valve remembers the level of your water consumption at different times and is adapted so that clean water is available even at peak consumption, for example, at weekends.

Regeneration takes place in 5 stages

• Flushing with back flow of water. At the same time, iron and manganese compounds are washed out of the filter media.
• A solution of salt is fed from the brine tank into the filter vessel, passes through the Ecomix^® and washes away hardness salts and organic matter from it. Impurities with the remnants of the solution are discharged into the sewage.
• Short backwash. Once again, loosens the load and washes away the remnants of the salt solution.
• Flush the Ecomix^® with a direct stream of water to lay layers of media in the desired order.
• Fill the brine tank with water to dissolve the salt tablets and prepare the solution for the next regeneration.

Thanks to the use of a multifunctional valve, the filter does not require constant attention. The only important task connected to maintenance for customer is timely stocking of the salt. It will ensure efficient regeneration of the filter media and thus durable filter service life and water quality.
If any problem arises, the valve will display a text message about the problem.

Technical data

Requirements to the feed water