-
About us
-
For partners
-
For consumers
-
Products
Water, passing through the case of the ultraviolet disinfectant, where the disinfection process takes place.
The quartz cover is a necessary measure to prevent water from entering the case of the emmiter.
High dose of UV irradiation (30 mJ/cm2), sufficient to deactivate a wide range of microorganisms.
Physical method of disinfection does not require the use of additional reagents and does not form drains.
The case is made of AISI 304 brand stainless steel.
The chamber is made of high-purity silica, and is highly resistant to the formation of deposits and destruction.
Term of effective operation is up to 9,000 hours.
Designed for disinfection of drinking water and household appliances in the house, hotel, cafe, restaurant, points and devices for bottling water, as part of drinking water treatment plants, as well as in industry for various technological processes
— timely replacement lamp change once a year;
— cleaning components from mechanical impurities and plaque.
Parameter |
Value |
|
Maximum flow of disinfected water, m3/hour |
1.81 |
|
Type and number of emitters |
1 x T529 |
|
Maximum inlet pressure, bar |
8 |
|
Power supply |
230 V, 50 Hz |
|
Power consumption of one emitter, W |
29 |
|
Diameter of piping |
1" thread |
|
Lamp failure control device |
visual |
|
Approximate weight, kg |
3.5 |
Parameter |
Value |
|
Temperature of treated water, °C |
+4…+30 |
|
Turbidity, mg/L |
0.58 |
|
General hardness, meq/L |
2.5 |
|
Iron, mg/L |
0.3 |
|
Manganese, mg/L |
0.05 |
|
Hydrogen sulfide, mg/L |
0.05 |
stainless steel housing assembly;
quartz sleeve;
UV emitter;
power supply (electronic ballast).
