We have been producing water purifying filters for 29 years and selling them in more than 60 countries

  • Products
  • About us
  • For partners
  • For consumers

We have been producing water purifying filters for 29 years and selling them in more than 60 countries

Ecosoft dual gradient PP melt blown sediment replacement filter 2.5"×10"

Article : CPV2510205ECO
  • Transparent water, protection of household appliances, pipes and main filter   ?
  • Dirt-holding capacity is 3 times higher than conventional polypropylene replacement filters  ?
  • It saves space  ?

Basic information

The filter is intended to purify water from sediment particles such as rust, sand, scale, silt etc.

It provides protection of plumping and pipes from damages.

Dual gradient design allows creating two distinct filter zones. Larger particles are trapped and filtered out in the first zone and the smaller particles are trapped in the second zone. It allows the cartridge to operate at higher velocities and lower pressure drop.

This structure allows filter efficient water purification with higher filtration rate with lower pressure drop.

Key advantages

  • 30 000 liters capacity

  • 3 times higher rejection rates comparing to standard PP filters

  • Low losses of pressures

  • Stable operation even in case of water turbidity changes

  • Superior quality, saving costs and space  

Gradient Cartridge Comparison

  • Absolute protection

Gradient replacement filter, in contrast a conventional, not contaminated through the full depth. Thas why it is able to purify 3 times more water.


  • Large active surface

Pollution evenly distributed over the layers, and do not concentrate only on the surface. Therefore, the gradient replacement filter retains 3 times more impurities.



1-bathroom apartment or house inhabited by up to 3 residents.

Benefits of using the replacement filter

  • Shower and bath with pure and transparent water

  • Sanitary ware will sparkle, plumbing will be clean and working well

  • Shower and Jacuzzi sprayers will remain clean, water pressure will be high

  • Your home appliances and heating systems will work longer  

  • Replacement filters for drinking water will have to be replaced much less often

The replacement filter represents a polypropylene porous cylinder produced using the melt-blown technique.

Necessary degree of rigidity is achieved without application of core by melting fibers into the rigid structure.  

The replacement filter reduces contents of sediment particles, and clean water is supplied to the consumer.

The replacement filter is intended for cold water only.

The replacement filter is not intended for purification of microbiologically contaminated water without proper decontamination of feed or purified water.

The service life of the replacement filter depends on the quality of feed water.

Do not exceed the recommended filtration rate, this can lead to deterioration of water purification quality.

The replacement filter must be replaced at least every 6 months.

Characteristics of Ecosoft gradient melt blown PP replacement filter 2,5"х10"



Type of filter

dual gradient sediment filters


polypropylene fiber

Standard size


Filter rating, micron

20 / 5

Water temperature, °C  


Height, mm  

250 ± 2.0

External diameter, mm  

60 ± 2.0

Recommended filtration rate, l/min