We have been producing water purifying filters for 28 years and selling them in more than 50 countries

  • Products
    0
  • About us
  • For partners
  • For consumers

We have been producing water purifying filters for 28 years and selling them in more than 50 countries

Ecosoft carbon block replacement filter 2.5"×10"

Article : CHVCB2510ECO
  • Water is free from odors and has sweetish taste  ?
  • Efficient water purifuing during all servica life  ?
  • Replacement 1 time in 3-6 months  ?
€6
VAT NOT included
6

Filter media represents by carbon-block from coconut shell activated carbon.

The Ecosoft carbon block replacement filter reduces content of chlorine and chlorination by-products, concentration of heavy and non-ferrous metals, phenol, oil products and pesticides. Improves color, taste and odor of water. Due to its block structure removes sediments size up to 10 micron.

The carbon block Ecosoft 2.5 "x10" increased resource for chlorine reduction — 15 000 liters.

Is suitable as third stage of purifuing in 3-stage or reverse osmosis filters.

Consumers

Apartment or house with 3-stage oe reverse osmosis filter inhabited up to 5 people. 

Key advantages

  • Tasty water thanks to 100% granular coconut shell carbon

  • Extended capacity of 15 000 L

  • Reduction of chlorine and organic matter, improvement of taste, color and odor of water

  • Uniform of structure provides full surface filtration.

  • Applicable for reverse osmosis filters produced by other manufacturers

Benefits of using the filter

  • In case of timely replacement of the cartridge water after using the filter will be delicious.

  • Sweet tasty water withought bad odor. 

  • Transparent water withought sand, rust and scale.

Replacement filter represents cylindrical housing filled with filtering material — activated coconut shell carbon.

During the filter operation water flows through the media which absorbs chlorine and chlorination by-products, reduces concentration of heavy and non-ferrous metals, phenol, oil products and pesticides. Improves color, taste and odor of the water.

Due to its block structure the filter also reduces sediments larger 10 micron.

The replacement filter is intended for cold tap water only.

The filter capacity depends on the quality of feed water, and might fluctuate from the values indicated above.

Do not exceed the recommended filtration rate, this can lead to deterioration of water purification quality.  

Before use, plunge a new replacement filter into cold water, and keep it submerged at least during 8 hours.

After the filter replacement, discharge at least 10 liters of filtered water into the drain.

The filter is recommended to be replaced every 3 months regardless of the volume of consumed water.

Technical and operational characteristics of carbon block replacement filter 2,5''x10''

Parameter

Value

Full height, mm

250±2.0

Maximum outer diameter, mm

67±0.5

Maximum capacity, L

15 000

Operational temperature of water, °C

+3…+43

Recommended filtration rate, L/min

1.0

Nominal filtration rating, micron

10

Service life, not more than, months

6