Ecosoft BB10 in-line water filter

Attention! Replacement filters are not included.

Basic information

The Ecosoft filter BB10 is intended for purification of cold water for household purposes. Impurities to be removed depend on the installed replacement filter.  

The filter housing is made of high-quality and highly durable polypropylene.  

Can be used with replacement filters of standard size 4.5" × 10". 
With the filter, you can install the replacement filter appropriate specifically for your water condition:

• Ecosoft sediment filter – for reduction of sediments (sand, silt, rust, scale etc.);
  


• Ecosoft filter for chlorine reduction – for reduction of chlorine and chlorination by-products, oil products and pesticides, improvement of color, taste and odor of water; 
• Ecosoft filter for hydrogen sulfide reduction – for reduction of hydrogen sulfide, improvement of color, taste and odor of water;
• Ecosoft filter for iron reduction – for reduction of iron, oil products and pesticides, pH correction, improvement of color, taste and odor of water. 

Perfect for

Benefits of using the filter

• Shower and bath in pure water with no unpleasant impurities or odors

• Sparkling sanitary ware

• Longer service life of home appliances

Components of the filter

• Filter housing

• Bracket

• Service wrench

• Screws

• User manual

Filter installation

Installation of the filter should be performed by a qualified specialist.

Connection to plumbing is performed with metal-plastic pipes. You may need fittings or adapters (not included in the filter set).

During the filtration process, water is supplied to the replacement filter, which removes impurities. As a result, you get pure water. 

The Ecosoft BB10 in-line filter is intended for purification of cold water only.

For permanent access to pure water we recomend to replace filters once in 2-6 month.

Service life of the replacement filter depends on water condition and volume of filtered water.

In the end of the service life the filter has to be replaced. Screw off the bulb with the service wrench. Take out the exhausted replacement filter, wash the bulb with tap water and insert the new replacement filter. Screw tight the filter housing back to the filter lid.

Characteristics