• About us
  • For partners
  • For consumers
  • Products

Salt tablets for water softeners 25 kg

Article : KECOSILEXP
  • Convenient form  ?
  • does not cause the formation of the precipitate in the salt-solvent tank 
  • Suitable for various filter models 
€16.25
VAT NOT included
16.25

Purpose

The tablet salt is intended for the regeneration of ion exchange resins used as a filter media in Ecosoft iron and hardness reduction filters FK and softening filters FU.

Key advantages:

  • A convenient form of salt for the regeneration of Ecosoft Ecosil, it comes in the form of tablets compressed under a load of 900 tons

  • Packaging does not allow moisture and provides long-term storage

  • Salt is supplied in the form of tablets conveniently packaged in 25 kg bags.

  • Does not cause the formation of an insoluble deposit in the solution tank

  • complies with European quality standards

The filter is connected to the cold water supply. Water pre-cleaned from sediment particles enters the filter vessel filled with ion-exchange resin. Water passes through the resin layer which reduces hardness of water. Purified water is supplied to consumer through the central pipe of the filter vessel.

When the resin is exhausted, and can no longer absorb the ions of hardness, the control valve switches the filter to regeneration mode. For user’s convenience, the valve settings are programmed so that the filter is regenerated at the time when water is not consumed. 

Regeneration

Regeneration of the filter media is divided into 4 clearly predetermined stages that are carried out by the valve independently. 

  • The first stage - bachflush in order to plough up the filter media and wash out sediment particles from it. 

  • Then the brine solution is supplied from the brine tank to the filter vessel to pass through resin. As a result, hardness salts are washed out, and together with the remains of solution are discharged to sewers. 

  • At the end of the regeneration, the resin is washed with a direct stream of water (step 3) to wash out remains of brine solution. 

  • The last stage (4) is filling the brine tank with water to dissolve the tablet salt and prepare the solution for the next regeneration. 

After that, the filter can be again used for water purification.

Cookies

This Platform uses first- and third-party cookies to improve your experience and our services, analyzing browsing within the Platform. By continuing to browse you are accepting their use.

You can find more information or learn how to change the settings in our Cookie Policy.

By continuing to browse you are accepting their use.

Also you confirm that you have read and understood the Privacy Policy.