Water kiosk

Ecosoft water production kiosk

Artnumber: FMFAMO025K
Price Upon Request
Article: FMFAMO025K

The Ecosoft water production kiosk is intended for purification and pouring of the water into consumer bottles. This ready-to-use module consists of several functional units.

  • The water purification unit includes 9 consecutive stages: reduction of sediments, of chlorine with activated carbon, of water color, water softening, removal of up to 99.8% of all impurities with the reverse osmosis membrane, adjustment of water pH, improvement of taste and odor, remineralization and UV disinfection.

  • The water pouring unit is a terminal for placing and filling the customer bottles with water, volumes 0.5 to 18.9 L.

  • The payment unit is presented by the bill acceptor, coin acceptor and magnetic card reader.

  • The telemetry unit, the key component of which is a multifunction controller with GSM/GPSR module. Provides the following operations: control of the reverse osmosis system operation and the pouring process, blocking of the operation in emergency situations, display of warning and emergency messages, remote transmission of the emergency messages by SMS.

Key advantages

  • Quick start - start earning in 3 weeks

  • Independency - the kiosk gains profit 24/7 and does not require constant control

  • High profitability - the cost of 1 L of water is 3 times lower than alternatives

  • Quickly pays off - the average return on investment period is 8-12 months

  • Maintenance - our network of service centers provides technical support in all the regions of the country

  • Stable efficiency of the operation provided by the Dow Filmtec™ membranes (USA)

  • Remote control – the GSM/GPRS module provides monitoring by Internet

  • Anti-vandal protection - housing made of durable material and shock-resistant control panel

  • Compact - the minimum rent required, since only 1 m2 of space is sufficient for the kiosk

  • Quality guarantee confirmed by international CE and ISO certificates

Technical characteristics

Nominal capacity for purified water, L/hour

(T = 20 °C)


Maximum capacity for purified water, L/day

(T = 20 °C)


Power consumption, kW

not more than 2.4

Power supply

230 V, 50 Hz

Performance class

IP 54

Connection diameter:

feed water




Feed water pressure, bar


Feed water temperature, °C


Pressure in membrane module, bar

not more than 12

Water purification unit parameters for operation mode:

  • water consumption, L/h

  • permeate consumption, L/h

  • discharge to the sewage system, L/h

  • recycle, L/h

  • pressure in the module, bar






Water purification unit parameters in forward flush mode:

  • water consumption, L/h

  • duration of forward flush, min



Dimensions (height x depth x width), mm


Requirements to the feed water

Hardness, meq/L

≤ 20

Iron, mg/L

≤ 0.1

Manganese, mg/L

≤ 0.05

Chemical oxygen demand, mg O2/L

≤ 4

TDS, mg/L

≤ 2000

Silicates, mg/L

≤ 20

Residual chlorine, mg/L

≤ 0.1

Temperature of feed water, °С


Basic components of the kiosk

  • Sediments filter

  • Chlorine reduction filter

  • Constant antiscalant dosing station

  • Reverse osmosis system

  • Proportional dosing station of remineralization solution

  • Storage tank for the purified water

  • UV disinfection system

  • Pump station for distribution of the purified water

  • GAC filter

  • Chemicals dosing station for container cleaning

The Ecosoft water production kiosk is connected to the cold water supply. The main purification method used in these systems is the reverse osmosis technology. The stages of water purification can be divided into water pre-treatment before the reverse osmosis membrane, actually the membrane filtration and a complex of water post-treatment stages.

The feed water first flows through the sediment filter, where it is purified from sand, rust and other impurities dangerous for sound operation of pumping equipment. Then residual chlorine is reduced at the carbon filter, and the water is supplied to the reverse osmosis membrane with the high-pressure pump. Pre-filters protect the following equipment accordingly: the sediment filter protects the pump, and the carbon filter prevents irreversible destruction of the membrane from its exposure to chlorine.

After the membrane the water is saturated with a mineral solution for remineralization of drinking water, and then supplied to the storage tank for the pure water. To guarantee complete safety of the purified water for consumers, it constantly circulates in the tank through the UV lamp. Whenever needed by consumers, the water flows out of the tank to enter the carbon block post-filter intended to improve its odor and taste.

The kiosk is intended for cold water only. Maintenance and monitoring of its operation should be carried out by qualified personnel of the service centers. The maintenance procedure includes the regular replacement of replacement elements, replenishment of antiscalant and salts for remineralization.


Recommended filter, reagent

Replacement interval

Sediment filter


pressure drop of 0.5 bar

every 3 months

after 30 m3 of purified water

GAC, 25 kg


every 18 months

RO membrane


replacement - once a year

chemical cleaning - every 6 months, or according to the system operation passport

Storage tank

disinfection every 3 months

if necessary - replacement

Odor and taste improvement filter


every 3 months

after 30 m3 of purified water



when necessary

Water remineralization

when necessary

UV lamp


once a year