Sediment filters Ecosoft FP

Sediment filter Ecosoft FP 1354

Artnumber: FP1354CT
€791
Article: FP1354CT
SYMPTOMS: Sand and rust
DIMENSIONS: Standard
SERVICE: Automatic regeneration
OPERATING MODE: With a stop for regeneration

The sediment filter FР 1354 is generally intended for water purification from sediment impurities (silt, sand, rust, scale) and application for a 1-bathroom apartment or cottage with up to 4 residents.

The filter can be also used as the first stage of water purification before application of water softeners, Ecomix, chlorine and hydrogen sulfide removing filters to ensure their proper and effective operation.

The filter is made of a robust vessel filled with high-quality Filter-Ag Plus® sorptive media produced by Clack Corporation (USA), and a multifunctional control valve.

The unique control valve engineered by Clack Corporation (USA) guarantees absolute independence of system service and ensures regular reserve of purified water.

Key advantages:

  • Fully automatic and noise-free

  • Durable and efficient operation during no less than 5 years

  • Low volume of discharge

  • Quality guaranteed by the international CE and ISO certificates

Results of implementation:

  • Crystal clear water running from every tap in the house

  • No mud and sand sediments on the surface of bath and sink

  • Longer service life of home appliances, sanitary ware and heating systems

  • Safe and smooth water for bathing, hand, and dishwashing



Technical data


Capacity (nominal), m3/h     

1.0

Volume of Filter-Ag Plus® filter media, L

56.6

Water consumption for regeneration, m3

2.1

Duration of regeneration, min

15…30

Water volume for one regeneration, m3

0.5…1.0

Required level of pretreatment from sediment particles

100 micron

Operating pressure, bar    

2…6

Pressure drop in service mode, bar

0.5…1.0

Temperature of feed water, °C

+4…+30

Power supply and consumption of control valve

230 V, 50 HZ, up to 30 W

Connection (male thread)

1"

Net weight, kg

50

Filter dimensions (HxD), cm

159 х 34

Components of the filter:

  • Filter vessel

  • Clack WS1CT multifunctional control valve (USA)

  • Clack Corporation Filter-Ag Plus® filter media (USA)

The filter is connected to cold water supply. Water enters the filter vessel, goes through the layer of the filter media, which effectively reduces sediment. Purified water is delivered to consumer through the riser pipe of the filter vessel.

When the filter is exhausted, it automatically switches to the regeneration mode in order to regenerate the operational characteristics of the filter media. At the prescribed time the control valve shifts the system into the regeneration mode. For the consumer’s convenience, the system is regenerated during the time when water is not being consumed. During the regeneration the filter is backwashed at high speed, the water stirs and cleans surface of filter media, washing out all the impurities, and then is being discharged into drain. After this the system can be used for water purification again. Untreated feed water is used for the regeneration.



Thanks to the application of the multifunctional control valve, the filter is independent. If any problem arises, the valve will inform about the problem at the display with a text message containing contact information of service center.