Sediment filters Ecosoft FP

Ecosoft FP 4872-2H sediment filter

Artnumber: FP-4872-2H
Price Upon Request
Article: FP-4872-2H

The Ecosoft FР 4872-2H sediment filter is intended for reduction of sediment (silt, sand, rust, scale) in water, applicable for objects with capacity below 14 m3/h.

The filter can be also employed as the first stage of water purification before water softeners, complex purification, chlorine and hydrogen sulfide reduction filters to ensure their proper and effective operation.

The filter is made of a robust vessel filled with high-quality Filter-Ag® sorption media produced by Clack Corporation (USA), and a multifunctional control valve.

The unique control valve produced by Clack Corporation (USA) guarantees complete autonomy of the filter operation and provides regular reserve of purified water.

Key advantages:

  • High efficacy of 20-40 micron sediments reduction  

  • Fully automatic and noise-free

  • Low consumption of water for regeneration due to light weight of the material

  • Quality guaranteed by the international CE and ISO certificates

Benefits of using the filter:

  • Crystal clear water running from every tap in the house

  • No silt and sand sediments on the surface of bath and sink

  • Longer service life of home appliances, sanitary ware and heating systems

  • Safe and smooth water for bathing, hand and dish washing

Technical parameters


Service capacity m3 / hour

14.0

Volume of Filter-Ag® filter media, L

849

Volume of quartz sand (base layer), kg

375

Water consumption for regeneration, m³/hour

28.0

Duration of regeneration, min

15…30

Water volume for one regeneration, m³

7.0…14.0

Required level of pretreatment from sediments

100 micron

Operating pressure, bar

2…6

Pressure drop in service mode, bar

1.0…1.5

Temperature of feed water, °C

+4…+30

Power supply and consumption of control valve

230 V, 50 Hz, up to 30 W

Connection (male thread)

2

Net weight, kg

1000

Filter dimensions (HxL), cm

274 х 124

Components of the filter:

  • Filter vessel with distributive node

  • Clack WS125 CE multifunctional control valve (USA)

  • Clack Corporation Filter-Ag® filter media (USA)

The filter is connected to cold water supply. Water enters the filter vessel, goes through the layer of the filter media, which effectively reduces sediment. Purified water is delivered to consumer through the riser pipe of the filter vessel.

When the filter is exhausted, it automatically switches to the regeneration mode in order to regenerate the operational characteristics of the filter media.

At the prescribed time the control valve shifts the system into the regeneration mode. For the consumer’s convenience, the system is regenerated during the time when water is not being consumed. During the regeneration the filter is backwashed at high speed, the water stirs and cleans surface of filter media, washing out all the impurities, and then is being discharged into sewers. After this the system can be used for water purification again. Untreated feed water is used for the regeneration.



Due to the application of the multifunctional control valve, the filter is independent. If any problem arises, the valve will inform about the problem at the display with a text message containing contact information of service center.