Replacement filters

NASHA VODA carbon block replacement filter 2.5”×10”

Artnumber: CHVCB2510NV
10.50 USD
Article: CHVCB2510NV

Key advantages

  • Tasty water thanks to coconut shell carbon block

  • Extended capacity of 15 000 L  

  • Uniformity of structure, i.e. filtration with all the surface of the filter

  • Reduction of chlorine, organic matter and sediments down to 10 micron, improvement of taste, color and odor of water

  • Applicable for filters produced by other manufacturers

Basic information

The filtration media is presented by activated coconut shell carbon block. Filtration rating is 10 micron.

The filter reduces content of chlorine and chlorination by-products, concentration of toxic heavy metals, phenol, oil products and pesticides. Improves color, taste and odor of water. Due to its block structure the filter also reduces sediments larger 10 micron.

The filter’s honest capacity is up to 15 000 L.  

The filter is used as the 3rd stage of water treatment for 3-stage and reverse osmosis filters.

Can replace filters of the standard size of 2.5’’×10’’ produced by other manufacturers.

Consumers

Apartment or house inhabited by 2 to 5 people using domestic 3-stage or reverse osmosis filter.

Benefits of using the filter

  • Source of tasty water

  • No unpleasant odors or flavors

  • Water will acquire sophisticated sweetish flavor  

  • Water will become transparent with no sediments like sand, rust, scale and others

The filter represents a cylinder block of the activated coconut shell carbon. During the filter operation water flows through the media which absorbs chlorine and chlorination by-products, reduces concentration of toxic heavy metals, phenol, oil products and pesticides. Improves color, taste and odor of the water.

Due to its block structure the filter also reduces sediments larger 10 micron.

Technical and operational characteristics

Parameter

Value

Full height, mm

250±2.0

Maximum outer diameter, mm

67±0.5

Maximum capacity, L

15 000

Operational temperature of water, °C

+3…+43

Recommended filtration rate, L/min

1.0

Nominal filtration rating, micron

10

Service life, not more than, months

6


The replacement filter is intended for cold tap water only.

The filter capacity depends on the quality of feed water, and might fluctuate from the values indicated above.

Do not exceed the recommended filtration rate, this can lead to deterioration of water purification quality.  

After the filter replacement, discharge at least 10 liters of filtered water into the sewer.

The filter is recommended to be replaced every 3 months, regardless of the volume of consumed water.