Replacement filters

NASHA VODA 2.5"x10" polypropylene melt blown replacement filter with bacteriostatic effect

Artnumber: CPV25105BNV
Price Upon Request
Article: CPV25105BNV

Key advantages:

  • Capacity enhanced by 50%

  • Risk reduction of secondary microbiologic contamination of water by the filter

  • High quality of purification 

  • Stable characteristics for retention of the particles

  • European high melt flow PP    

Basic information

The NASHA VODA 2.5"x10" polypropylene melt blown replacement filter with bacteriostatic effect is intended for preliminary purification of cold water from sediment particles such as rust, sand, scale, silt etc., contaminants of which lead to development of slime.

The special bacteriostatic mineral food grade supplement decreases development of slime in 2 times. Due to uniform melting-in of the supplement growth of bacteria is reduced on the whole surface of the filter.

Capacity of the replacement filter is 15 000 L.

The replacement filter is intended for treatment of cold tap water from sediments larger than 5 micron.

Consumers

1-bathroom apartment or house inhabited by up to 3 residents.

Benefits of using the replacement filter:

  • Shower and bath with pure and transparent water

  • Sanitary ware will sparkle, plumbing will be clean and working well

  • Shower and Jacuzzi sprayers will remain clean, water pressure will be high

  • Your home appliances and heating systems will work longer 

  • Replacement filters for drinking water will have to be replaced much less often

The replacement filter represents a polypropylene porous cylinder produced using the melt-blown technique.

Necessary degree of rigidity is achieved without application of core by melting fibers into the rigid structure.  

The replacement filter reduces contents of sediments, and clean water is supplied to the consumer.

The replacement filter is intended for cold water only.

The replacement filter is not intended for purification of microbiologically contaminated water without proper decontamination of feed or purified water.

The service life of the replacement filter depends on the quality of feed water.

Do not exceed the recommended filtration rate, this can lead to deterioration of water purification quality.

The replacement filter must be replaced at least every 6 months.

Technical characteristics

Type of filter

sediment filters

Material

polypropylene fiber

Standard size

2.5"× 10"

Filter rating, micron

5

Water temperature, °C 

+5 .. + 30

Height, mm 

250 ± 1.0

External diameter, mm 

60 ± 1.0

Recommended filtration rate, l/min

10