Replacement filters

Filter1 replacement filter for hardness reduction 2.5”×10”

Artnumber: CMV2510F1
5.00 USD
Article: CMV2510F1

Key advantages

  • Affordable price for guaranteed quality  

  • Full capacity up to 500 L

  • Hardness reduction

  • Filter housing made of pure European food grade plastic

  • Applicable for reverse osmosis filters produced by other manufacturers

Basic information

The replacement filter contains food grade ion-exchange resin.  

The filter reduces hardness which leads to formation of deposits on sanitary ware and scale on the surface of heating elements.  

The filter housing is made of pure European food grade plastic.

The filter is used as one of the stages of water treatment in streamline filters.

Can replace filters of the standard size of 2.5’’×10’’ produced by other manufacturers.

Consumers

Apartment or house inhabited by 2 to 5 people using streamline filter.

Benefits of using the filter

  • No scale while boiling water

  • Fruits and vegetables will keep vitamins

  • Natural taste and aroma of tea and coffee

  • Home appliances (kettle, iron, steam cooker, air humidifier etc.) will stay protected from scale and malfunction related to scale   

The filter represents a cylinder vessel containing the filter media. During the filter operation water flows through the media which exchanges the hardness cations of calcium and magnesium for sodium ions absolutely harmless for human health and sanitary ware.

Technical and operational characteristics

Parameter

Value

Full height, mm

252±1.0

Fixation height, mm

250±1.0

Maximum outer diameter, mm

72±0.5  

Maximum capacity, L

500

Operational temperature of water, °C

+3…+43

Recommended filtration flow rate, L/min

1.0

Service life, not more than, months

6


The replacement filter is intended for cold tap water only.

The filter capacity depends on the quality of feed water, and might fluctuate from the values indicated above.

Do not exceed the recommended filtration rate, this can lead to deterioration of water purification quality.  

After the filter replacement, discharge at least 10 liters of filtered water into the sewer.

The filter is recommended to be replaced every 3 months, regardless of the volume of consumed water.