Replacement filters

Filter1 2.5"x10" polypropylene melt blown replacement filter, 5 micron

Artnumber: CPV25105F1
1.00 USD
Article: CPV25105F1

Key advantages:

  • 10 000 litres capacity

  • High quality of purification  

  • Stable characteristics for retention of the particles

  • European high melt flow PP    

  • Protection of plumbing and sanitary ware

Basic information

The Filter1 2.5"x10" 5-micron porous polypropylene replacement filter made using the melt-blown technique is intended to purify water from sediment particles such as rust, sand, scale, silt etc.  

The replacement filter protects sanitary ware and plumbing from damage.

Its capacity is 10 000 L.

The replacement filter is intended for treatment of cold tap water from sediment particles larger than 5 micron.

Consumers

1-bathroom apartment or house inhabited by up to 3 residents.

Benefits of using the replacement filter:

  • Shower and bath with pure and transparent water

  • Sanitary ware will sparkle, plumbing will be clean and working well

  • Shower and Jacuzzi sprayers will remain clean, water pressure will be high

  • Your home appliances and heating systems will work longer  

  • Replacement filters for drinking water will have to be replaced much less often

The replacement filter represents a polypropylene porous cylinder produced using the melt-blown technique.

Necessary degree of rigidity is achieved without application of core by melting fibers into the rigid structure.  

The replacement filter reduces contents of sediment particles, and clean water is supplied to the consumer.



The replacement filter is intended for cold water only.

The replacement filter is not intended for purification of microbiologically contaminated water without proper decontamination of feed or purified water.

The service life of the replacement filter depends on the quality of feed water.

Do not exceed the recommended filtration rate, this can lead to deterioration of water purification quality.

The replacement filter must be replaced at least every 6 months.



Type of filter

sediment filters

Material

polypropylene fiber

Standard size

2.5"× 10"

Filter rating, micron

5

Water temperature, °C  

+5 .. + 30

Height, mm  

250 ± 1.0

External diameter, mm  

60 ± 1.0

Recommended filtration rate, l/min

10