Replacement filters

NASHA VODA replacement filter for iron reduction 4.5”×20”

Artnumber: CRVF4520NV
24.00 USD
Article: CRVF4520NV

Key advantages

  • Reduction of iron up to 80%  

  • Full capacity 10 000 L

  • Stable operation and efficiency throughout the service life

  • Filter housing made of pure European food grade plastic

  • Applicable for filters produced by other manufacturers

Basic information

The replacement filter contains the blend of catalytic sorption material, high-quality activated carbon and pH corrector.  

The filter reduces content of iron and its by-products in borehole water, as well as decreases concentration of oil products and pesticides. Improves color, taste and odor of water.

The filter housing is made of pure European food grade plastic.

Can replace filters of the standard size of 4.5’’×20’’ produced by other manufacturers.

Consumers

Users of borehole water with iron content up to 1 mg/L.

Benefits of using the filter

  • Reduction of iron

  • Transparent water with no red or brown shades

  • No brown deposit in the kettle

  • Metallic taste will disappear from the water  

  • No unpleasant odors or flavors

The filter represents a cylinder vessel containing the filter media. During the filter operation water flows through the media which reduces content of iron and its by-products in borehole water, as well as decreases concentration of oil products and pesticides, improves color, taste and odor of water.

Technical and operational characteristics

Parameter

Value

Height, mm

508±2.0

Maximum outer diameter, mm

114±1.0  

Maximum capacity, L

10 000

Operational temperature of water, °C

+3…+43

Recommended filtration flow rate, L/min

5.0

Service life, not more than, months

6


The replacement filter is intended for cold borehole water only.

The filter capacity depends on the quality of feed water, and might fluctuate from the values indicated above.

Do not exceed the recommended filtration rate, this can lead to deterioration of water purification quality.  

Before use, plunge a new replacement filter into cold water, and keep it submerged at least during 8 hours.

After the filter replacement, discharge at least 10 liters of filtered water into the sewer.

The filter is recommended to be replaced every 3 months, regardless of the volume of consumed water.