Replacement filters

NASHA VODA 4.5”x20” replacement filter for hydrogen sulfide reduction

Artnumber: CRVS4520NV
47.00 USD
Article: CRVS4520NV

Key advantages

  • High quality of purification

  • 30 000 L capacity

  • Stable characteristics throughout the service life

  • Filter housing made of high-quality European food grade plastic  

  • Applicable for filters produced by other manufacturers

Basic information

The NASHA VODA replacement filter for hydrogen sulfide reduction 4.5”x20” contains the Centaur catalytic activated carbon.

The filter reduces the content of hydrogen sulfide in borehole water, as well as the organic matter including oil products and pesticides, and improves color and odor of the water.

The filter housing is made of the pure high-quality European food grade plastic.

The replacement filter is compatible with filters of 4.5”x20” standard size produced by other manufacturers.

Consumers

Owners of houses supplied with borehole water containing hydrogen sulfide.

Benefits of using the replacement filter

  • Reduction of hydrogen sulfide content in the water

  • Access to pure water without weird odors or flavors

The replacement filter represents a cylinder vessel containing filter media. During the filter operation water flows through the media which reduces the content of hydrogen sulfide, as well as of organic matter including oil products and pesticides, and improves color and odor of the water.

Technical and operational characteristics

Parameter

Value

Height, mm

508±2.0

Maximum outer diameter, mm

114±1.0

Maximum capacity, L

30 000

Operational temperature of water, °C

+3…+43

Recommended filtration flow rate, L/min

5.0

Maximum service life, months

6


The replacement filter is intended for cold borehole water only.

The service life of the replacement filter depends on the quality of feed water, and might fluctuate from the indicated values.

Do not exceed the recommended filtration rate, this can lead to deterioration of water purification quality.

Before use, plunge the new replacement filter into cold water and keep it submerged for at least 8 hours.

After the new replacement filter is installed, discharge at least 10 liters of filtered water into the sewer.

The filter is recommended to be replaced every 3 months, regardless of the volume of consumed water.