Hydrogen sulfide reduction filters Ecosoft FPC

Hydrogen sulfide reduction filter Ecosoft FPC 2162CE125

Artnumber: FPC2162CE125
€3,376
Article: FPC2162CE125
SERVICE: Automatic regeneration

The Ecosoft FPC 2162CE125 filter is intended to reduce contents of hydrogen sulfide in water. The filter is commonly used for objects with capacity below 2.65 m3/h (5.3 m3/h in case the Ecosoft FK or FU filters are applied before).    

The filter represents a durable vessel filled with high-quality CENTAUR® catalytic carbon (Calgon Carbon Corporation, USA), and is completed with a multifunction control valve.

The unique control valve is developed by Clack Corporation (USA). It provides filter’s independent service, keeps constant reserve of purified water and doesn’t require any special attention.

Key advantages:

  • High efficiency for reduction of hydrogen sulfide and unpleasant odors in water

  • Fully automatic and noise-free

  • Durable and efficient operation during no less than 1.5 years

  • Low volume of water consumption for regeneration thanks to light weight of the media

  • Quality guaranteed by the international CE and ISO certificates  

Technical parameters:

Nominal flow rate, m3/hour

2.65

Flow rate after Ecosoft FK or FU, m3/hour

5.3

Volume of CENTAUR® activated carbon, kg

75

Volume of quartz sand (base layer), kg

50

Water consumption for regeneration, m3/hour

5.3

Regeneration duration, min

15...30

Water volume per one regeneration, m3

1.3...2.5

Required level of water pre-treatment from sediments

100 micron

Operating pressure, bar

2...6

Pressure drop in service mode, bar

0.5...1.0

Temperature of feed water, ⁰C

+4...+30

Power supply and consumption of control valve

230 V, 50 Hz, up to 30 W

Connection (male thread)

1.25"

Net weight, kg

180

Filter dimensions (height x diameter), cm

212x55

Components of the filter:

  • Filter vessel

  • Clack WS15 СE multifunctional control valve (USA)

  • Calgon Carbon Corporation CENTAUR® activated carbon (USA)

There are not many solutions to reduce contents of hydrogen sulfide in water at the present time. Application of the patented CENTAUR® media is one of the simplest and efficient. This is an activated carbon, processed with a special technology. After the processing its surface acquires catalytic properties, and is able to oxidize hydrogen sulfide to safe compounds that do not emit any smells.  

The filter is connected to cold water source. Pre-treated from sediment particles, the water enters the filter vessel filled with the CENTAUR® media. The media effectively removes the odor of hydrogen sulfide from the water. The purified water is delivered to consumer through the riser pipe of the filter vessel.

To regenerate the properties of the media, so called regeneration is conducted. The control valve shifts the filter to the regeneration mode at specific pre-set time. For user’s convenience, the regeneration is held when there is no consumption of water.

During regeneration, water is backwashed at high speed through the filter to clean the surface of the media by washing out all the impurities, and then it is discharged into the sewer. After that, the filter can be again used for water purification. For regeneration, untreated feed water is used.



Thanks to the use of a multifunctional valve, the filter does not require constant attention. If any problem arises, the valve will inform about the problem at the display with a text message containing contact information of service center.