Hotel

Ecosoft FU 2162CE125 filter for hardness reduction

Artnumber: FU-2162CE125
2 140.00 USD
Article: FU-2162CE125
OPERATING MODE: With a stop for regeneration
FUNCTIONS: Water for rooms

Ecosoft FU 2162 filter is intended for water softening (reducing hardness), applicable for objects with capacity below 8.2 m3/h.

The filter represents a vessel filled with the Dowex ion-exchange resin, a multifunctional control valve and a brine tank for resin regeneration.

The unique control valve is a product developed by Ecosoft and produced by Clack Corporation (USA). It provides filter’s independent service, keeps constant reserve of purified water and doesn’t require any special attention.

Key advantages:

  • Fully automatic and noise-free

  • Durable and efficient operation during no less than 5 years

  • Cost-effective salt consumption and low volume of discharge

  • Quality guaranteed by the international CE and ISO certificates

Technical data

Capacity nominal/peak, m3/hour

6.8/8.2

Volume of filter media, L

200

Volume capacity, m3 (for hardness at 5 meq/L)

40

Salt consumption per one regeneration, kg

20..32

Water consumption per one regeneration (volume of discharge), m3

2

Regeneration duration, min

80..110

Pressure drop in service mode, bar

0.5..1.0

Operating pressure, bar

2..6

Power supply

230 V, 50 Hz

Power consumption, W

30

Diameter of pipeline connections

1 ¼”

Net weight, kg

230

System dimensions (width x depth x height), cm

120x70x215

Requirements to the feed water:

Hardness

meq/L

15.0

Iron  

mg/L

0.2

Manganese

mg/g

0.05

Chemical oxygen demand

mg O2/L

5.0

Required level of purification from sediment particles

micron

100

Temperature of feed water

°С

+4 … +30

Components of the filter:

  • Filter vessel

  • Clack WS2 СЕ multifunctional control valve (USA)

  • Brine tank with brine system for regeneration

  • Dowex ion-exchange resin (Dow Chemical, USA)

The filter is connected to the cold water supply. Water pre-cleaned from sediment particles enters the filter vessel filled with ion-exchange resin. Water passes through the resin layer which reduces hardness of the water. Purified water is supplied to consumer through the riser pipe of the filter vessel.

After the resin is exhausted, and can no longer absorb the ions of hardness, the control valve switches the filter to regeneration mode. For user’s convenience, the valve settings are programmed so that the filter is regenerated at the time when water is not consumed.

Regeneration of the filter media is divided into 5 clearly predetermined stages that are carried out by the valve independently. At the first stage the filter is backwashed in order to plough up the filter media and wash out sediment particles from it.  Then the brine solution is supplied from the brine tank to the filter vessel to pass through resin. As a result, hardness salts are washed out and together with the remains of solution are discharged to sewers. Stage 3 is a short backwashing to plough up the filter media again and wash away the remains of brine solution. After backwashing, washing of the resin is carried out with direct water flow (stage 4). The last stage (5) represents filling the brine tank with water to dissolve the tablet salt, and preparation of the solution for next regeneration. After that, the filter can be again used for water purification.

Due to the use of a multifunctional valve, the filter does not require constant attention. The only important task connected to maintenance for customer is timely stocking of the salt. It will ensure efficient regeneration of the filter media and thus durable filter service life and water quality.

If any problem arises, the valve will inform about the problem at the display with a text message containing contact information of service center.