We have been producing water purifying filters for 29 years and selling them in more than 60 countries
We have been producing water purifying filters for 29 years and selling them in more than 60 countries
The Arkal disc filter removes sand, rust, sludge and other sediments from water. It is applied for the primary purification of water taken from surface sources and groundwater.
Purifying water of sediments is an important stage for your pipes, plumbing, household appliances, and also to extend the service life of the next stage filters.
Fits for pre-treatment of household and commercial objects with a capacity below 8 m3/hour.
In the Arkal filtration systems disc filtration is used. The filtering element is presented by the set of special discs with various micron rating.
All the Arkal discs are made of durable polymer materials. On their surfaces on both sides there are diagonal channels of certain depth and width which provide highly accurate and fine filtration.
After compression of every two discs, between them the volumetric mesh structure is formed, which represents the working filtering element. The filtering surface in such case is the total surface area of all the discs in the set. During filtration, the water is supplied into the discs that reduce the impurities. As a result, consumers get pure water.
The Arkal 1" short sediment filter is intended for purification of cold water only.
Service life of the discs depends on feed water condition (degree of contamination with impurities) and volume of filtered water.
To perform cleaning of the system, it is necessary to switch off the filter, unscrew the filter housing manually, and wash the discs with washing solutions or water.
Parameter |
Value |
Maximum capacity, m3/hour (130 micron) |
25.0 |
Maximum operating pressure, bar |
10.0 |
Temperature of water, °C |
+5…+30 |
Connection diameter |
1,5″ |
Dimensions (L x H), mm |
200 x 210 |
Assembled filter housing
Service wrench key